Hebei Zhengtian Fan Manufacturing Co., Ltd.
Product
Contact Us
E-mail:
youtian@hbztfj.com
WhatsApp:
Add:
Renqiu City, Cangzhou City, Hebei province, discuss Bao township Shoulian village east Yi road east
4-68
keyword:
- Description
-
Purpose
Type 4-68 centrifugal fans are generally used for ventilation in factories and large buildings. They can be used for both intake and exhaust of gases. This fan can transport air or other non-combustible, non-explosive, non-volatile gases that are harmless to humans and non-corrosive to steel. The gas must not contain viscous substances, and the content of dust and hard particles must not exceed 150mg/m³ 3 The gas temperature must not exceed 80℃.
Type
This fan is usually made as a single-suction type, with model numbers: N2.8, 3.15, 3.55, 4, 4.5, 5, 6.3, 8, 10, 12.5, 16, 20 (twelve model numbers in total).
The fan can be manufactured in two types: clockwise and counterclockwise. Viewed from the motor end, the impeller rotating clockwise is called a clockwise fan, indicated by "right"; otherwise, it is a counterclockwise fan, indicated by "left". The fan outlet position is indicated by the angle of the casing outlet. Both "left" and "right" can be manufactured at 0°, 45°, 90°, 135°, 180°, 225°
The fan has four transmission methods: A, B, C, and D. 2.8~5 adopts type A, which is direct motor connection. The impeller and casing of the fan are directly fixed to the motor shaft and flange (using B35 motor). 6.3~12.5 adopts cantilever support, which is further divided into type C (belt drive, pulley on the outside of the bearing) and type D (using a coupling for connection). 16 and 20 use type B cantilever support with belt drive, and the pulley is in the middle of the bearing.
FAQ
Can I have my own custom product?
Yes. oem and odm can be provided, including design, logo, packaging, etc.
What is the minimum order quantity?
It depends on the product.
What are the terms of payment?
Wire transfer or letter of credit, Western Union, Alipay, etc.
When is the delivery time?
Inventory orders within 7-15 days, for oem and odm orders, the specific time depends on the actual situation.
Can I take samples for testing?
Yes, samples can be sent for testing before bulk ordering.
Do you have pre-shipment inspection procedures?
Yes, we always test the products before delivery.
Inquiry Message
Note: Please leave your contact information and our professionals will contact you as soon as possible!
Related Products