Hebei Zhengtian Fan Manufacturing Co., Ltd.
Product
KT40 Type External Axial Flow Fan
The T40 axial flow fan is suitable for ventilation and air exchange in general factories, warehouses, offices, and residential areas, or for enhancing heating and heat dissipation.
The G, Y6-51 boiler induced draft fan is mainly used for the induced draft system of 2t/h~670t/h steam boilers in thermal power plants, and also meets the high-pressure head performance parameters of fluidized bed boilers. This series of fans can also be used for dust removal, mine ventilation and general ventilation systems.
High-pressure centrifugal fan 9-19
9-19 and 9-26 high-pressure centrifugal fans are generally used for forging furnaces and high-pressure forced ventilation. They can also be widely used for conveying materials, air, and gases that are non-corrosive, non-self-igniting, non-explosive, non-volatile, and do not contain sticky substances. The medium temperature generally does not exceed 50℃ (higher temperature not exceeding 80℃), and the content of dust and hard particles in the medium is not more than 150mg/m3.
The G4-73 and Y4-73 type boilers' induced draft and forced draft fans are mainly suitable for the induced draft and forced draft fan systems of steam boilers ranging from 2 to 670 tons/hour in thermal power plants. In the absence of other special requirements, the G4-73 can also be used for mine ventilation and general ventilation.
Before the fan, a dust removal device must be installed to minimize the dust content in the flue gas entering the fan as much as possible. According to the general usage conditions of power plants, the efficiency of the installed dust collector must not be less than 85%.
The main features of the G, Y7-41 type industrial boiler induced draft fan are: high fan efficiency, high total pressure, low noise, flat performance curve, and a wide economic operating range. It uses backward curved blades, and the efficiency at the ideal operating point within the total pressure is 86.5%. The noise level (A-weighted sound level) is LS=11.5 decibels. These two indicators are better than those of various existing industrial boiler induced draft fans in the country. If this fan achieves the same flow and pressure as other models, the fan shaft speed can be significantly reduced (generally by 200 to 800 revolutions per minute), which greatly lowers the fan noise and ensures stable and reliable operation.
The medium conveyed by the ventilator is air, with a maximum temperature not exceeding 80°C. The induced draft fan conveys flue gas, and at the same flow rate, this induced draft fan can increase the pressure by more than 30% compared to the original Y5-47 boiler induced draft fan. Therefore, it is particularly suitable for industrial boilers with a capacity of 1 to 20 tons per hour that use spiral pipes and are equipped with multi-tube dust collectors.
The main features of the G, Y7-41 type industrial boiler induced draft fan are: high fan efficiency, high total pressure, low noise, flat performance curve, and a wide economic operating range. It uses backward curved blades, and the efficiency at the ideal operating point within the total pressure is 86.5%. The noise level (A-weighted sound level) is LS=11.5 decibels. These two indicators are at a better level compared to various existing industrial boiler induced draft fans in the country. If this fan achieves the same flow and pressure as other models, the fan shaft speed can be significantly reduced (generally by 200 to 800 RPM), which greatly lowers the fan noise and ensures smooth and reliable operation.
The main purpose of the 4-72 centrifugal fan is for indoor ventilation and air exchange in general factories and large buildings, or for conveying air and other non-combustible, non-explosive, non-volatile gases that are harmless to the human body and non-corrosive to steel.
Boiler centrifugal induced draft fan
The G Y5-51 type boiler induced draft fan is suitable for the induced draft fan system of steam boilers ranging from 2t/h to 670t/h in thermal power plants.
High-pressure centrifugal fan 9-26
9-19 and 9-26 high-pressure centrifugal blowers are generally used for forging furnaces and high-pressure forced ventilation. They can also be widely used for conveying materials, air, and non-corrosive, non-combustible, non-explosive, non-volatile gases that do not contain sticky substances.
Boiler centrifugal induced draft fan
The G, Y6-41 series centrifugal fans are upgraded products for boiler induced draft and forced draft fans.
Type 4-68 centrifugal fans are generally used for ventilation in factories and large buildings, and can be used for input or output gas. This fan can transport air or other non-combustible, non-explosive, non-volatile gases that are harmless to the human body and non-corrosive to steel. The gas must not contain viscous substances, and the content of dust and hard particles must not exceed 150mg/m3. The gas temperature must not exceed 80℃.
9-19 and 9-26 high-pressure centrifugal fans are generally used for forging furnaces and high-pressure forced ventilation. They can also be widely used for conveying materials, air, and gases that are non-corrosive, non-self-igniting, non-explosive, non-volatile, and do not contain sticky substances. The medium temperature generally does not exceed 50℃ (higher temperature not exceeding 80℃), and the content of dust and hard particles in the medium is not more than 150mg/m3.