Industrial Fan

4-72 type, 4-68 type, 6-48 type, 4-79 type, Y5-47 type, Y5-48 type, Y6-41 type, C4-73 type, 9- 19 type, 9-26 type, 11-62 type and other series of fans.

Axial Flow Fan

Mine main fan, local fan, T35-11 type, ST35-11 type, SF type, T40 type, T30 type, KT40 type, cold storage special fan, paper mill fan, brick factory fan.

Id fan in thermal power plant

The G4-73 and Y4-73 type boilers' induced draft and forced draft fans are mainly suitable for the induced draft and forced draft fan systems of steam boilers ranging from 2 to 670 tons/hour in thermal power plants. In the absence of other special requirements, the G4-73 can also be used for mine ventilation and general ventilation.

4-68

Type 4-68 centrifugal fans are generally used for ventilation in factories and large buildings, and can be used for input or output gas. This fan can transport air or other non-combustible, non-explosive, non-volatile gases that are harmless to the human body and non-corrosive to steel. The gas must not contain viscous substances, and the content of dust and hard particles must not exceed 150mg/m3. The gas temperature must not exceed 80℃.

4-72

Model 4-72A centrifugal fan can transport air and other non-combustible gases that are harmless to humans and non-corrosive to steel. The gas must not contain viscous substances, and the dust and hard particles contained must not exceed 150mg/m3. The gas temperature must not exceed 80℃. This fan is widely used in environmental protection and dust removal, industrial and mining enterprises, large buildings, hotels, restaurants, and other indoor ventilation, ventilation, and smoke exhaust.

High-pressure centrifugal fan 9-19

9-19 and 9-26 high-pressure centrifugal fans are generally used for forging furnaces and high-pressure forced ventilation. They can also be widely used for conveying materials, air, and gases that are non-corrosive, non-self-igniting, non-explosive, non-volatile, and do not contain sticky substances. The medium temperature generally does not exceed 50℃ (higher temperature not exceeding 80℃), and the content of dust and hard particles in the medium is not more than 150mg/m3.

8-09

The 8-09 and 9-12 high-pressure centrifugal blowers are special blowers for iron melting furnaces with melting rates of 1, 2, 3, 5, and 7 t/h. They can also be used for various furnaces, forging furnaces for air blowing and conveying, and for conveying non-corrosive, non-self-igniting gases without sticky substances. Similar performance blowers can also be selected. The temperature of the conveyed medium must not exceed 80℃, and the dust and hard particles contained in the medium must not exceed 150 mg/m³.

5-51

This fan is suitable for induced and forced draft fan systems of steam boilers with a capacity of 2t/h~670t/h in thermal power plants. It can also meet the high-pressure performance parameters of fluidized bed boilers. This series of fans can also be used in dust removal, mine ventilation, and general ventilation systems. This model of fan can be designed as explosion-proof, corrosion-resistant, and high-temperature fans according to user requirements, with the same external dimensions as the original model.

Y5-47 type boiler centrifugal induced draft fan

The Y5-47 II type boiler centrifugal induced draft fan is suitable for industrial boilers burning various types of coal, equipped with smoke and dust removal devices, with a capacity of 0.2t/h to 20t/h. It can be used as long as the intake conditions are comparable and the performance is compatible, but the higher temperature must not exceed 250°C.

High-pressure centrifugal fan 9-26

9-19 and 9-26 high-pressure centrifugal blowers are generally used for forging furnaces and high-pressure forced ventilation. They can also be widely used for conveying materials, air, and non-corrosive, non-combustible, non-explosive, non-volatile gases that do not contain sticky substances.

Boiler centrifugal induced draft fan

The G Y5-51 type boiler induced draft fan is suitable for the induced draft fan system of steam boilers ranging from 2t/h to 670t/h in thermal power plants.

Centrifugal fan